Accessing videos from Nexar Light, Nexar Pro, Beam, Scosche NEXC1 and NEXS1's SD card
In order to export your Ride videos from the SD card and save it to your computer:
- Eject the SD card from your dash cam by pushing the SD card insert in the upper part of the camera next to the “Power” button
- Insert the SD card into an SD card reader (available for purchase in any electronics store or use the adapter received in the package and insert the SD card into your computer)
- Plug the SD card reader into the computer’s USB outlet
- A folder containing the videos on your SD card will show up - transfer all of the desired videos to the computer’s drive
Accessing videos from Nexar One and NEXC2's internal memory
Nexar One
Nexar One's internal memory recordings are encrypted for your security. It cannot be removed, so it can only be accessed from the Nexar app.
- Plug the dash cam to power and stay nearby
- Turn on the phone's WIFI network
- Open the Nexar app
- Tap Videos below the screen
- Select the drive you want to trim
- Click Save to cloud
- For Nexar One with a cabin view add-on, swipe left on the video to switch to cabin view
- Trim the relevant part and click Save clip
This will allow you to save your drive recordings to the Nexar app and then back it up to the Nexar Cloud.
NEXC2
NEXC2's built-in internal memory cannot be removed, but you can access it directly by following these instructions:
- Download the Nexar Memory Card Reader to your computer or laptop
-
Plug the dash cam into your computer or to an external power source
-
Connect your computer to the dash cam’s WiFi network. Look for the network DIRECT-XXXXXX and enter password 12345678 (unclick 'Remember this network')
-
Wait until your dash cam’s flashing light is steady
-
Double click your dash cam’s power button
-
Click “Connect” on the Nexar Card Reader app on your computer
- You can now view all the drive footage and recordings in NEXC2's internal memory
Do I need to buy an SD card for my dash cam?
Nope! An SD card is included when you order a Nexar Pro, Beam, NEXC1, or NEXS1 dash cam. The NEXC2 and Nexar One dash cams come with a built-in internal memory which is preset upon purchase.
What is the size of the SD card?
By default, the Nexar Pro, Beam, and NEXS1 dash cams come with a 32GB SD card, which can store approximately 4.5 hours of footage. The NEXC1 comes with a 16GB SD card which can store up to 2 hours of drive recordings.
Can I change or upgrade the SD card to a higher storage capacity?
Nexar Pro, Beam, and NEXS1 dash cams can be upgraded up to 256GB while NEXC1 can carry up to 128GB.
Nexar One's internal memory can be upgraded up to 512 GB from the time of your purchase, but it cannot be changed later on. Nexar One's internal memory is not removable, nor have an SD card that can be upgraded after purchase.
NEXC2's internal memory cannot be upgraded.
What kind of SD cards are compatible with the camera?
The following SD cards are compatible with the Nexar Pro, Beam, NEXC1, and NEXS1 dash cams only.
64GB
- Samsung - PRO Endurance, model name: MB-MJ64GA/AM - Click here to purchase.
- Transcend - Premium, model name: TS64GUSDU1 - Click here to purchase
- Transcend - High Endurance, model name: TS64GUSDXC10V - Click here to purchase
128GB
- Transcend - Premium TS128GUSDU1 - Click here to purchase
- Transcend - High Endurance TS128GUSDXC10V - Click here to purchase
256GB
- Transcend - TS256GUSD300S
Can I use the dash cam without the SD card?
We highly advise against this! Removing the micro SD card while the dash cam is ON, could permanently damage your dash cam. Also, you must keep the card in the camera during firmware upgrades. Otherwise, permanent failure may occur.
Do I need to delete videos from my SD card?
No. The dash cam will automatically delete old rides off the SD card so you’ll always have space.
Is there audio available on the SD card?
Yes, audio is saved directly to your SD card.
Comments
Article is closed for comments.